4 - 5 GETTING STARTED
Setting the Phone Line Type
If you are connecting the MFC to a PBX or PABX, you need to
change the Phone Line Type to PBX by completing the following
steps.
1
Press Menu, 0, 4.
2
Press or to select
ISDN,
PBX (or Normal).
Press Set.
3
Press Stop/Exit.
PABX and TRANSFER
The MFC is initially set to be connected with PSTN (Pub lic Switched
Telephone Network) lines. However, many offices use a central
telephone system or Private Automatic Branch Exchange (PABX).
Your MFC can be connected to most types of PABX. The MFC’s
recall feature supports timed break recall only (TBR). TBR will work
with most PABX systems, allowing you to gain access to an outside
line or transfer calls to an other extension. The feature work s when
the Tel/R key is pressed.
You can program a Tel/R key press as part of a number stored
in a One-Touch or Speed-Dial loc ation. When programming the
One-Touch or Speed-Dial numb er (Function menu 2-3-1 or
2-3-2) press Tel/R first (the screen displays "!"), then enter the
telephone number. If you do th is, you do not need to press
Tel/R each time before you dial using a One-Touch or
Speed-Dial location. (See Storing numbers for easy dialling on
page 7-1.)
Initial Setup
4.Phone Line Set