4 - 1 GETTING STARTED
4

Initial Setup

Setting the Date and Time

Your MFC displays the date and time and if yo u set up the Station I D
it prints on every fax you send. If there is a power failure, you may
have to reset the date and time. All other settings will not be affected.
1
Press Menu, 0, 2.
2
Enter the last two digits of the year.
Press Set.
3
Enter two digits for the mont h.
Press Set.
(For example, enter 09 for September, or 10 for October.)
4
Enter two digits for the day.
Press Set.
(For example, enter 06 for 6th.)
5
Enter the time in 24-Hour format.
Press Set.
(For example, enter 15:25 for 3:25 P.M.)
6
Press Stop/Exit.
The LCD now shows the date and time whenever the MFC is in
Standby mode.
Getting started
Initial Setup
2.Date/Time