![](/images/new-backgrounds/1223752/22375243x1.webp)
GETTING STARTED
Inserting a Tape Cassette
Tape cassettes of 0.13", 0.23", 0.35", 0.47" or 0.70" (3.5mm, 6mm, 9mm, 12mm or 18mm) width can be used in your mark.
• If the new tape cassette has a cardboard stopper, be sure to remove the stopper before inserting the cassette.
•If the ink ribbon is loose, use your finger to wind the toothed wheel in the direction of the arrow as shown on the tape cassette.
1
Check that the end of the tape is not bent and | End of tape |
that it passes through the tape guide. If the |
|
tape is not passed through, pass it through |
|
the tape guide referring to the illustration. |
|
Tapeguide
2
After making sure that the power is off, lift open the tape compartment cover. If there is already a tape cassette in the machine, remove it by pulling it straight up.
16 |
Inserting a Tape Cassette