TROUBLESHOOTING
Message
Cause/Remedy
Select Other |
| The tape length set using the tape length setting is shorter | |
Margin! * |
| than the total length of the left and right margins applied for | |
|
| the "Large Margin" setting. Select a different margin setting. | |
Text |
| The length of the label to be printed using the text entered is |
|
Too Long! * |
| longer than the length setting. Edit the text to fit within the set | |
|
| length or change the length setting. | |
Text |
| The text size is too large. Select a different size option. |
|
Too High! * |
|
|
|
Check # of |
| The number of digits entered in the bar code data does not | |
Digits |
| match the number of digits set in the bar code parameters. | |
Entered! * |
| Enter the correct number of digits. | |
Input A,B,C or D | The bar code data entered does not have the required start/ |
| |
At Start&End! * | stop code (A, B, C, or D required at the beginning and end of | ||
|
| the bar code data for the CODABAR protocol). Enter the bar | |
|
| code data correctly. |
|
Maximum Of |
| There are already 5 bar codes entered in the text data when | |
5 Bar Codes |
| you try to enter a new bar code. You can only use up to five | |
Per Label! * |
| bar codes in each label. | |
Category Full! | * | The memory available for categories is full. To make more |
|
|
| memory available, delete any unnecessary registered label | |
|
| files by highlighting the label file and pressing the OK key. | |
Installed tape is | Tape that is incompatible with the machine has been |
| |
not compatible with | installed. Use compatible tape. | ||
this machine! | * |
|
|
OK to Feed? * |
| Feeding tape after printing when [Chain print] |
|
|
| is selected. Refer to ”Setting Margin” on page 45. |
|
*Press any key to clear the error message.
58 |
Error Messages
