
2. INSTALLATION
2-4-2. Other cords
For Europe specifications, Americas 220V specifications and 100 V/400 V system specifications, connect the cords according to the respective specifications.
<Seen from underneath table>
Leg
Control box
Green and yellow wire (ground wire)
<Europe specifications>
(1)Filter box
(2)Screws [4 pcs]
(3)Connector
(4)CE bush plate
(5)Screws [2 pcs]
(6)CE D cord cover
(7)Screws [2 pcs]
(8)Staples [5 pcs]
(9)Power cord
1.Attach an appropriate plug to the power cord (9). (The green and yellow wire is the ground wire.)
2.Insert the power plug into a
NOTE:
・Take care when tapping in the staples (8) to make sure that they do not pierce the cords.
・Do not use extension cords, otherwise machine operation problems may result.
0486D
8 |