
4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
4-5. Adjusting the needle up stop position
1 |
|
|
|
|
|
|
|
|
|
| 0526D |
| (While pressing the | key (1), turn on the power switch.) | “MorG” will appear in the display (2). |
| |
|
|
|
|
|
|
2 | Selecting “UPoS” |
|
|
|
|
| (Setting item) |
|
|
|
|
|
| (Press once) |
|
| 0527D |
|
|
|
|
| |
|
|
|
| ||
3 | Needle up stop position setting | ・ If the D | key is pressed, the setting value | ||
|
| (Setting value) | will increase and the needle up stop position | ||
|
| Example | will become lower. |
| |
|
|
| ・ If the C | key is pressed, the setting value | |
|
|
| will decrease and the needle up stop position | ||
|
|
| will become higher. |
| |
|
|
| ・ The setting range is from |
| |
|
|
| NOTE: |
|
|
|
|
| A setting value of “10” corresponds to an | ||
|
|
| angle of rotation of approximately 10° for the | ||
|
|
| upper shaft. |
| |
|
| Becomes higher |
|
|
|
|
| Becomes lower |
|
|
|
|
|
|
| 0528D | 0529D |
|
|
|
| ||
4 |
|
| The setting will be stored and the display will | ||
| (Setting item) | return to the setting item. |
| ||
|
|
|
|
| 0530D |
|
|
|
| ||
5 |
|
| Normal sewing machine operation will then be | ||
|
| possible. |
|
| |
|
|
|
|
| 0520D |
|
|
|
|
|
|
* For details on other adjustment items, refer to the Service Manual.
24 |