3. USING THE OPERATION PANEL (BASIC OPERATIONS)
3-2. Sewing start and end backtack stitches
0841M
1 | Setting start backtack stitches |
| For example, |
| 3 stitches and |
| 4 stitches |
| 0499D |
|
|
2 | Setting end backtack stitches |
| Example: |
| 0500D |
|
|
3 | Start backtacking is carried out. After it has finished, normal sewing continues for as long as |
the treadle remains depressed. | |
| NOTE: |
| If the treadle is returned to the neutral position, the sewing machine will continue |
| operating until the set number of start backtack stitches has been sewn. |
| 2159M |
|
|
4 | End backtacking is carried out. After it has finished, the thread is trimmed automatically and |
the sewing machine stops in the needle up position. | |
| NOTE: |
| ・ If the treadle is depressed backward before sewing of the set number of start backtack |
| stitches is complete, end backtacking will not be carried out. |
| ・ If thread trimming lock is set, the sewing machine will stop in the needle up position |
| without thread trimming being carried out. |
| 2160M |
14 |