
3. USING THE OPERATION PANEL (BASIC OPERATIONS)
3.USING THE OPERATION PANEL (BASIC OPERATIONS)
3-1. Names and functions
・The operation panel keys cannot be operated while sewing is in progress. Select the keys and set the number of stitches before starting sewing.
・In the case of keys with indicators, the indicator illuminates when that function is operating, and the indicator switches off when the key is pressed once more.
Power indicator
0489D
The power indicator illuminates when the power switch is turned on.
(1)Display
・When start backtack stitches are being displayed, the indicator of the start backtack key
(4)will illuminate, and the number of A stitches will appear in the A column and the number of B stitches will appear in the B column.
・When end backtack stitches are being displayed, the indicator of the end backtack key
(5)will illuminate, and the number of C stitches will appear in the C column and the number of D stitches will appear in the D column.
・When continuous backtack stitches are displayed, the indicator of the continuous backtack key (6) will illuminate, and the number of A, B, C and D stitches will appear in order starting from the left column of the display.
・The three indicators on the right side of the window show which value is appearing in the four columns of the display. The
0490D
(2)SEL (Select) key
The value in the display (1) can be changed each time this switch is pressed.
0491D
(3)Setting keys
These keys are used to set the number of backtack stitches for A, B, C and D.
・When the key is pressed, the setting increases from 0 up to 9.
・If you press the key once more when “9” is displayed, the value will return to “0”. 0492D
(4)Start backtack key
When this key is pressed so that the indicator illuminates, the number of start backtack stitches (0 - 9) in the A and B columns of the display are sewn.
0493D
(5)End backtack key
When this key is pressed so that the indicator illuminates, the number of end backtack stitches (0 - 9) in the C and D columns of the display are sewn. When the treadle is depressed backward, the end backtack stitches are sewn and then the thread is trimmed automatically.
If the treadle has not yet been depressed backward, the end backtack function can be set to ON, the number of stitches can be changed and the function can be set back to OFF.
0494D
(6)Continuous backtack key
When this key is pressed so that the indicator illuminates, the number of backtack stitches (0 - 9) in the A, B, C and D columns of the display are sewn continuously. After the sewing machine sews a full cycle of stitches set by A, B, C and D, the thread is trimmed
automatically. | 0495D |
12 |