4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

4-4-3. Setting thread wiping

The initial setting value is ON.

If the thread wiper is connected but thread wiping is not to be carried out, change this setting to OFF.

1

Activating setting mode

 

 

 

 

(Setting item)

 

 

(While pressing the thread trimming disable/F1 key, turn on the

 

 

 

power switch.)

 

0517D

 

 

 

 

2

Selecting “WiP” (thread wiping)

When the D

key is pressed, the next

 

 

setting is displayed.

 

(Setting item)

When the C

key is pressed, the

 

previous setting is displayed.

 

 

 

(Press four times)

 

 

 

 

 

0524D

 

 

 

 

3

Enabling and disabling thread wiping

When the D

key is pressed, the “on”

 

 

display will appear.

 

(Setting value)

When the C

key is pressed, the “oFF”

 

display will appear.

 

 

Thread wiping enabled

 

 

Thread wiping disabled

 

 

NOTE:

 

 

 

If the SEL key (1) is pressed once more, the

 

 

ABCD indicator will switch off and the

 

 

display will return to the setting item.

 

 

 

0522D

 

 

 

4

 

The setting will be stored and the display will

(Setting item)

return to the setting item.

 

 

 

0525D

 

 

 

5

 

Setting mode will be exited and normal

 

operation will be possible.

 

 

 

0520D

 

 

 

 

23

S-7000DD