4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
4-6. Resetting all settings to their defaults
If the sewing machine stops operating normally, the cause may be that an incorrect setting may have been made for the memory data by means of memory switches, for instance. In such cases, it may be possible to restore normal operation by following the steps given below to initialize the memory setting data.
1.While pressing the continuous backtack key, turn on the power switch.
The mode wills witch to initialization mode and “1. ALL” will appear in the main display.
2. Press the C | or D | key to select an item to be initialized. | |
|
|
| |
| Main display | Initialization item | |
|
|
|
|
|
| 1.ALL | Clear all |
|
|
|
|
|
| 2.MEM | Memory switch initialization |
|
|
|
|
|
| 3.SPD | Sewing speed initialization |
|
|
|
|
|
| 4.SEW | Program initialization |
|
|
|
|
3.Press the ENTER key for 2 seconds or more.
Once initialization is complete, the main display will change to display “End”.
4.Press the FUNC key.
Initialization mode will be exited and normal sewing machine operation will then be possible.
*For details on initialization items other than “1. ALL”, refer to the Service Manual.
25 |