
UTILITY STITCHES
Memo
When lowering the presser foot, do not push in the front of the presser foot, otherwise the darning will not be sewn with the correct size.
a
aDo not reduce the gap.
e Pull down the buttonhole lever as far as possible.
a
aButtonhole lever
The buttonhole lever is positioned behind the bracket on the buttonhole foot.
a
b
aButtonhole lever b Bracket
f Gently hold the end of the upper thread in your left hand, and then start sewing.
Once sewing is completed, the sewing machine automatically sews reinforcement stitches, then stops.
g Press (Thread cutter button) once.
a
aThread cutter button
The threads are cut and the needle is raised.
h Raise the presser foot lever, and then remove the fabric.
Memo
If programmed
When you cut the threads by using the
thread cutter on the side of the machine or
scissors, first press (Needle position button) once to raise the needle, then raise the presser foot lever and pull the fabric to the left side of the machine, and then cut the threads. Refer to "Using the thread cutter" (page 60).
i Raise the buttonhole lever to its original position.
Memo
If the fabric does not feed, for example, because it is too thick, increase the stitch length. For details, refer to "Adjusting the stitch length" (page 62).
112