When the upper thread or the bobbin thread runs out while sewing, the sewing machine stops. Move the needle back about 10 stitches and resume sewing.
Memo
When the bobbin thread runs out, cut the threads and remove the embroidery frame before replacing the bobbin thread.
a Set the upper thread or bobbin thread.
b Press 
.
If the embroidery is stopped before it is complete, check the current needle count and layout before turning off the sewing machine.
Memo
When the sewing machine is turned off, the embroidery size and layout return to the original setting. If you have changed the layout, you need to adjust it again.
a Press 
(Start/stop button) to stop the sewing machine.
b Check the current needle count on the screen and make a note of it.
Memo
If the needle count is not displayed, display the needle count on the screen. For details, refer to "Stopping while embroidering" (page 167).
c Press 
.
d Press 
(Back one stitch) to move the needle back about 10 stitches.
(Forward one stitch) increases the stitch number.
4
If the needle count is not displayed, press
(Settings key), and then use 
to display the following screen.
Press 
to return to the previous screen.
c Press 
(Embroidery key).
e Restart the embroidery.
The confirmation message is displayed.
Editing and Saving Patterns 167