GETTING READY ————————————————————————————————————————————

a Press (Needle position button) once or twice to raise the needle, and then raise the presser foot lever.

a

b

aNeedle position button b Presser foot lever

b Turn off the sewing machine.

c Slide the bobbin cover latch to the right.

ab

aBobbin cover b Latch

￿The bobbin cover opens.

d Remove the bobbin cover.

eHold the bobbin with your right hand and hold the end of the thread with your left hand.

• Be careful not to drop the bobbin.

f Insert the bobbin into the bobbin case with your right hand.

• Be sure to insert the bobbin correctly.

CAUTION

●Be sure to insert the bobbin and depress it to the bottom with your finger. Otherwise, the thread may break or the thread tension will be incorrect.

●Be sure to thread the machine as indicated. Otherwise, the thread may break or the thread tension will be incorrect.

g Lightly hold down the bobbin with your right hand, and then guide the thread as shown with your left hand.

h Pass the thread through the slot as shown, and then pull the thread out toward the front.

a

aCutter

￿The cutter cuts the thread.

28