d Insert the extra spool pin into the end of the bobbin winder shaft, and install the thread spool on it. Then, thread the upper thread.
aBobbin winder shaft b Extra spool pin
c Thread spool
Memo
When setting the thread spool, set it so that the thread winds off from the front of the spool.
e Thread the upper thread for the right side in the same way that the upper thread for the left side was threaded.
•For details, refer to steps g through j of "Threading the upper thread" (page 32).
fWithout passing the thread through the needle bar thread guide, manually thread the right
needle. |
|
Pass the thread through the eye of the needle |
|
from the front. | 1 |
|
CAUTION
●The needle threader cannot be used with the twin needle. If the needle threader is used with the twin needle, the sewing machine may be damaged.
g Attach zigzag foot "J".
For details on changing the presser foot, refer to "Replacing the Presser Foot" (page 43).
CAUTION
●When using the twin needle, be sure to attach zigzag foot "J". If bunched stitches occur, use presser foot "N" or use a lightweight
h Turn on the sewing machine and select a stitch.
•For stitch selection see "Selecting stitching" (page 51).
•See "Stitch Setting Chart" (page 72) for stitches that use a twin needle.
CAUTION
●When using the twin needle, be sure to select an appropriate stitch, otherwise the needle may break or the machine may be damaged.
Upper Threading 37