EMBROIDERY
Editing and Saving Patterns
This section describes ways to edit, adjust, reposition and memorize patterns.
Adjusting the layout and the size
The pattern is normally positioned in the center of the embroidery frame. You can check the layout before starting embroidery and change the position and the size.
Memo
Keys that appear surrounded with a dotted
line (ex. 
) cannot be used.
a After selecting the embroidery pattern, press
.
The embroidery screen is displayed.
bPress 
.
The layout screen is displayed.
c Check and adjust the layout.
aLayout within the frame b Display unit (cm/INCH)
c Available embroidery frames d Change position keys
e Size key/Layout key f Rotation key
g Horizontal mirror image key h Trial key
i Starting point key
j Distance from the center k Embroidery size
Embroidery frame size
The size of embroidery frame that can be used is displayed. When the smaller mark is grayed out in the display, embroidery frame (small) cannot be used. These icons flash if the pattern was resized, the layout was adjusted, or the recommended embroidery frame size was changed.
CAUTION
●Use the embroidery frame that matches the size of the pattern being embroidered. Otherwise, the presser foot may hit the embroidery frame and cause needle breakage or injury.
162