No | Error Message |
| Probable Cause |
|
|
|
|
| |
19 |
| You changed the stitch pattern settings, and then tried to save them by |
| |
| pressing the manual memory key. |
| ||
|
|
| ||
|
|
|
| |
|
| You tried to select an embroidery pattern or change the layout when |
| |
20 |
| the needle was down. |
| |
| The machine is turned on while the needle is lowered and the |
| ||
|
|
| ||
|
| embroidery unit is attached. |
| |
|
|
|
| |
21 |
| You tried to initialize the embroidery unit with the embroidery foot |
| |
| lowered. |
|
| |
|
|
|
| |
|
|
|
| |
|
| A pattern was being retrieved from a USB flash drive (USB flash |
| |
|
| memory) containing more than 200 embroidery patterns (including |
| |
22 |
| folders). |
|
|
| In addition, this message will appear if embroidery patterns containing |
| ||
|
|
| ||
|
| many colors have been saved on the USB media, even if it contains |
| |
|
| data for no more than 200 patterns (including folders). |
| |
|
|
|
| |
|
| The start/stop button was pressed after selecting a pattern which is |
| |
23 |
| saved in the machine's memory or entered from the USB port without | 5 | |
|
| pressing | (Retrieve key). | |
|
|
| ||
|
|
|
| |
24 |
| The reverse/reinforcement stitch button, needle position button or |
| |
| thread cutter button was pressed while the bobbin winder shaft is |
| ||
|
| moved to the right. |
| |
|
|
|
| |
25 |
| A pattern is being saved. |
| |
|
|
|
| |
26 |
| The start/stop button or reverse/reinforcement stitch button was pressed |
| |
| when no pattern is selected. |
| ||
|
|
| ||
|
|
|
| |
27 |
| Bobbin thread has run out. |
| |
| Little bobbin thread remains. |
| ||
|
|
| ||
|
|
|
|
|
Troubleshooting 185