————————————————————————————————————————————————————

d Lower the presser foot lever.

a

aPresser foot lever

e Press (Start/stop button).

a

aStart/stop button

CAUTION

●Use the embroidery frame that matches the size of the pattern being embroidered. Otherwise, the embroidery frame may be hit by the presser foot and cause injury or needle breakage.

fAfter progressing 5-6 stitches, press (Start/stop button) to stop the machine.

g Use scissors to cut the thread at the beginning of the stitching.

Cut the thread at the edge of the stitching.

Note

￿If the thread is left at the beginning of the stitching, it may be sewn over as you continue embroidering the pattern, making it very difficult to deal with the thread after the pattern is finished. Trim the thread at the beginning.

h Press (Start/stop button) again.

￿The embroidery begins again.

￿Stitching stops automatically with reinforcement after one color has been completed. When automatic thread cutting is set, the thread is cut.

i Set up embroidery thread for the next color, and repeat steps b through h.

￿When the last color is sewn, "Finished sewing." will appear on the display. Press

, and the display will return to the initial screen.

j Cut the excess thread.

Memo

￿For the automatic cutting setting, refer to

"LCD (liquid crystal display) operation"

4

(page 153).

 

 

 

Embroidering 159