UTILITY STITCHES
The length for one satin stitch can be changed in five gradations.
a Press 
(Utility stitch key) on the
operation panel, and then select (Satin stitch).
b Select a satin stitch pattern.
c Press 
.
It turns to 
and the pattern becomes longer.
Each time you press it, the number changes.
You can select from 
- 
.
The space between alphanumeric characters can be adjusted.
a Press 
(Utility stitch key) on the operation panel, and then select characters.
b Press 
(Setting key).
c Press 
for character spacing.
Press 
to increase the character spacing.
Press 
to decrease the character spacing.
Memo
The default setting is "00". The number less than "00" cannot be set.
The result of adjusting the character spacing is valid for all characters. The result is valid not only while entering characters, but also before and after entering characters.
124