Bryant 580D manual PERFORMANCE DATA cont, COOLING CAPACITIES cont

												PERFORMANCE DATA (cont)
												COOLING CAPACITIES (cont)
580D090 (71¤2 TONS)
Temp (F)						Air Entering Evaporator Ð Cfm/BF
Air Entering		2250/0.07				2800/0.09							3000/0.10						3750/0.12
Condenser						Air Entering Evaporator Ð Ewb (F)
(Edb)
		72	67	62		72		67		62		72		67			62		72		67		62
	TC	102.8	94.8	86.2		105.8		98.2		90.0		106.4		99.0			90.8		109.2		101.6		93.6
75	SHC	49.4	61.8	73.2		52.6		67.8		81.6		53.6		69.8			84.0		58.2		77.4		92.2
	kW	7.14	6.82	6.50		7.28		6.98		6.68		7.32		7.04			6.72		7.46		7.18		6.86
	TC	98.2	90.2	81.6		101.8		93.6		85.2		102.6		94.4			86.0		104.6		96.8		89.6
85	SHC	48.0	60.2	71.2		51.6		66.4		79.6		52.8		68.6			82.0		56.8		76.0		89.4
	kW	7.66	7.34	7.00		7.82		7.50		7.18		7.86		7.54			7.22		7.98		7.68		7.40
	TC	93.8	85.2	76.6		97.0		88.4		80.0		97.6		89.0			81.2		99.4		91.2		85.2
95	SHC	46.4	58.2	68.8		50.2				77.2		51.4		66.8			79.0		55.6		74.4		85.2
								64.6
	kW	8.18	7.84	7.48		8.36		8.00		7.64		8.40		8.04			7.70		8.50		8.16		7.92
	TC	88.4	79.8	70.8		91.0		82.8		74.6		91.6		83.4			76.0		93.8		85.4		80.6
105	SHC	44.6	56.2	66.0		48.2		62.6		74.2		49.4		64.8			75.6		54.2		72.4		80.6
	kW	8.68	8.30	7.98		8.80		8.46		8.14		8.86		8.50			8.20		8.98		8.64		8.42
	TC	82.8	73.8	66.0		85.2		76.8		69.6		85.6		77.4			71.0		87.6		79.4		76.0
115	SHC	42.6	53.8	63.2		46.4		60.4		69.6		47.8		62.6			71.0		52.8		70.4		75.8
	kW	9.16	8.78	8.42		9.30		8.92		8.64		9.34		8.96			8.72		9.48		9.10		8.94
580D102 (81¤2 TONS)
Temp (F)							Air Entering Evaporator Ð Cfm/BF
Air Entering		2550/0.08					3000/0.10							3400/0.11						4250/0.135
Condenser							Air Entering Evaporator Ð Ewb (F)
(Edb)
		72	67		62		72		67		62		72			67		62		72		67		62
	TC	116.6	108.4		99.0		119.2		111.3		101.8		120.1		112.8			103.6		122.3		114.8		106.3
75	SHC	71.9	61.9		75.9		75.2		65.1		81.4		80.5			68.0		85.6		32.7		73.9		94.4
	kW	7.77	7.57		7.38		7.86		10.68		7.44		7.89			6.72		7.51		7.97		7.80		7.60
	TC	113.3	104.2		94.0		115.7		106.9		97.0		117.2		108.7			98.8		120.1		111.0		101.8
85	SHC	54.0	67.7		80.4		56.3		72.5		87.1		58.2			76.4		92.5		62.9		84.2		101.0
	kW	8.46	8.22		7.96		5.54		8.31		8.04		8.60			8.38		8.12		8.72		8.48		8.23
	TC	109.1	99.3		87.3		111.2		102.0		91.4		112.5		103.6			93.7		115.3		105.8		107.4
95	SHC	52.6	65.9		77.4		55.0		70.9		84.9		57.1			75.1		90.3		62.2		83.2		97.3
	kW	8.90	8.97		8.68		8.99		9.06		8.79		9.06			9.12		8.86		4.76		9.24		9.00
	TC	103.3	94.0		81.4		105.9		96.3		84.6		107.4			97.7		87.9		109.4		99.9		92.8
105	SHC	50.5	54.0		74.5		53.5		69.1		81.4		55.8			73.1		86.6		60.4		81.4		92.8
	kW	9.74	9.43		9.08		9.85		9.54		9.21		9.92			9.60		9.29		10.03		9.72		9.48
	TC	97.7	87.9		75.9		99.9		90.4		78.8		101.3			91.8		82.4		102.9		93.8		88.3
115	SHC	48.7	61.7		71.9		51.8		66.9		78.1		54.0			71.2		82.3		58.5		79.4		88.2
	kW	10.33	9.97		9.61		10.46		10.10		9.75		10.54		10.18			9.88		10.61		10.30		10.10

		Standard Ratings
		LEGEND
BF	Ð Bypass Factor
Edb	Ð Entering Dry-Bulb
Ewb	Ð Entering Wet-Bulb
kW	Ð Compressor Motor Power Input
Ldb	Ð Leaving Dry-Bulb
Lwb	Ð Leaving Wet-Bulb
SHC Ð Sensible Heat Capacity (1000 Btuh) Gross
TC	Ð Total Capacity (1000 Btuh) Gross

NOTES:

1.Direct interpolation is permissible. Do not extrapolate.

2.The following formulas may be used:

sensible capacity (Btuh)

tldb = tedb −

1.10 x cfm

tlwb = Wet-bulb temperature corresponding to enthalpy of air leav- ing evaporator coil (hlwb)

total capacity (Btuh)

hlwb = hewb −

4.5 x cfm

Where: hewb = Enthalpy of air entering evaporator coil

3.The SHC is based on 80 F edb temperature of air entering evapo- rator coil.

Below 80 F edb, subtract (corr factor x cfm) from SHC. Above 80 F edb, add (corr factor x cfm) to SHC.

Correction Factor = 1.10 x (1 − BF) x (edb − 80).

27