2-90 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
LES
Use LES (LAN emulation server) to control the status of the LES and BUS (broadcast and unknown server) servers
which are co-located. You can control both servers using LES.
Operators
start, stop
Parameters
This command has no parameters. Just type start les or stop les at the switch prompt.
Descriptions
Examples
switch_prompt # start les
If there are either local or external LANE clients with retry capability, you will see the following messages for each
client as connection is re-established:
NOTICE - 'ZLESSRV' LES sendjoinresp:
LES Join : 39:00:00:00:00:00:00:00:20:D4:14:15:00:00:20:D4:14:15:00:00
NOTICE - 'ZLESSRV'
Bus Connect 39:00:00:00:00:00:00:00:20:D4:14:15:00:00:20:D4:14:15:00:00
switch_prompt #
switch_prompt # stop les
STOPPING LES/BUS
Confirm(y/n)?:y
NOTICE - 'ZLESSRV' ***** LES shutdown *****
switch_prompt # start les
NOTICE - 'ZLESSRV' ***** LES started *****
switch_prompt # NOTICE - 'ZLESSRV' LES sendjoinresp:
SERVER SVC
X
Operator Parameters/Permissions Description
start les Administrator Starts the LES and BUS on the switch.
stop les Administrator Stops the LES and BUS on the switch.