2-30 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
ClientStat
Use ClientStat (client statistics) to view LANE (LAN emulation) or IP/ATM (IP over ATM) client statistics.
Operator
show
Parameters
In the Output Parameter table below, (</d>) appears next to parameters that are available only through the show
clientstat /d (detailed) command. The (IP/A TM) and (LANE) client indi cators after particular param eters i ndicate
that these parameters will display only if that particular client type is active.
SERVER SVC
XX
Input Parameter Description Value/Field Size Default
[ClientNumber] Number of the client. 0-127 ALL
Output Parameter Description
[Client Type] Type of client.
[RxPkts] Number of packets received.
[TxPkts] Number of packets transmitted.
[RxOctets] Number of octets (bytes) received.
[TxOctets] Number of octets (bytes) transmitted.
[Bytes Received] (</d>) Number of bytes received.
[Unicast Packets] (</d>) Number of unicast packets received or transmitted.
[Multicast Packets] (</d>) Interface maximum transfer unit to assign to the local interface associated
with this client.