SmartCell 6A000/ZX-250 Reference Manual 2-149
Console Commands
In the Output Parameter table below, (</d>) appears next to the parameter that is available only through the show pvc
/d (detailed) command. When (</s>) appears next to a parameter, the parameter appears in both the summarized table
and the detailed table.
[BkwTrafficDescIndex] Index of the traffic descriptor for the backward
(high-to-low) connection of VCs. This PVC
traffic descriptor must have no reserved
bandwidth.
1, 2, 3, 4.../
1-20 1
[PortNumber] Port number on the switch. ALL, A1...A4,
B1...B3, C1...C4,
D1...D4
ALL
[CrossConnId] C hronological sequential index marker of the
circuits. All PMP cross-connect IDs of the same
low port have the same cross-connect ID.
1, 2, 3, 4.../
n/a ALL
Output Parameter Descr iption Value/Field Size
[ConnId] (</s>) Same as [CrossConnId] Input Parameter. See above
[Conn SubId] (</s>) ID of the leaf in PMP connection. If you do not specify a
sub ID, all leaves of a PMP connection identified by the
cross-connect ID will be deleted.
1, 2, 3, 4.../
n/a
[Traffic Type] (</s>) Traffic type of the descriptor. CBR, NRTVBR,
RTVBR , UBR
[Admin Status] (</s>) Status of the VC. Modified by the Administrator. UP, DOWN
[LowPort] (</s>)
[LowVPI] (</s>)
[LowVCI] (</s>)
[HighPort] (</s>)
[HighVPI] (</s>)
[HighVCI] (</s>)
[FwdTrafficDescIndex]
(</s>)
[BkwTrafficDescIndex]
(</s>)
These parameters are available in the show pvc /s
option, as well as those listed above. See the Input
Parameter table above for descriptions.
n/a/
n/a
Input Parameter Description Value/Field Size Default