SmartCell 6A000/ZX-250 Reference Manual 2-167
Console Commands
Shutdown
Use Shutdown to shut down the switch to a state where it can be powered off. It stops all logging and synchronizes the
file system. This must be run before turning off the switch.
Operator

shutdown

Parameters
This command has no parameters. Just type shutdown at the switch prompt.
Description
Example
switch_prompt # shutdown
Confirm(y/n)?: y
switch_prompt #
You can switch off the system now
SERVER SVC
XX
Operator Parameters/Permissions Descriptions
shutdown Administrator After issuing this comman d, you will be prompted for
confirmation. Reply y to confirm; then you can safely power off
or reset the switch. By comparison, use exit when you have
only finished a console session.