2-46 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
Firmware
Use Firmware to re-program the switch application software when you want to perform a switch upgrade.
Operator

update

Parameters
Description
SERVER SVC
XX
Input Parameter Description Value/Field Size Default
[ServerIP] IP address of server with the updated image
files. dot decimal/
7-15 characters Last IP address
[Path] Full pathname from server (directory) to image
files. n/a last path used
Operator Parameters/Permissions Description
update
firmware [Server IP] <serverip>
[Path] <path>
Administrator
Updates the switch software (for example, when upgrading
your switch). You must know the full pathname of these
updated image files. The switch uses the TFTP protocol, so it
needs to be implemented on your server to complete this
command. You must then reboot you r switch (s ee “Reboot”)
for the new firmware to take effect. Reboot will not affect
your previous network configuration.