![](/images/backgrounds/120691/bged.png)
SmartCell 6A000/ZX-250 Reference Manual 3-5
Boot Load Commands
dcfg
Use dcfg to display information about the current boot PROM configuration
•Revision numbers of both boot load software images
•Display the switch MAC address
•Number (in hexadecimal) of contiguous MAC addresses after the base MAC address
•Show whether POST is on or off
Example
=>dcfg
Default Boot Load Software: 0
Boot Load Software0 Rev Number = 1
Boot Load Software1 Rev Number = 1
MAC address: 0 20 d4 14 85 0
Number of contiguous MAC addresses, starting at this base: 80
POST OFF
=>