SmartCell 6A000/ZX-250 Reference Manual 2-169
Console Commands
Descriptions
Examples
switch_prompt # modify sigconfig
PortNumber(A1) : A2
CurrentInterfaceType(UNI3.0) : UNI3.1
CurrentInterfaceRole(NETWORK) : USER
DefaultInterfaceType(UNI3.0) : UNI3.1
DefaultInterfaceRole(NETWORK) : USER
switch_prompt #
Operator Parameters/Permissions Description
modify
sigconfig [PortNumber] <portnumber>
[CurrentInterfaceType]
<interfacetype>
[CurrentInterfaceRole]
<interfacerole>
[DefaultInterfaceType]
<interfacetype>
[DefaultInterfaceRole]
<interfacerole>
Administrator
Modifies the current signaling configuration. This
command turns off AutoDetectSigType. Enter modify
portautodetect to turn AutoDetectSigType on again.
After you reboot the switch, if auto-detect is active (even if
it is set to IISP3.0 (interim inter-switch signaling
protocol)), the switch resets to the default IISP3.1 setting.
The UNI (user-network interface) setting remains the same.
If auto-detect is inactive, the IISP3.0 setting remains after
reboot.
show
sigconfig [PortNumber] <portnumber>
All
Displays the current signaling configuration—including
signaling timer details—of all or specified ports.