SmartCell 6A000/ZX-250 Reference Manual 2-177
Console Commands
SVC
Use SVC (switched virtual circuit) to see the SVCs created on the switch.
Operator
show
Parameters
In the Output Parameter table below, (</d>) appears next to parameters that are available only through the show svc
/d (detailed) command. When (</s>) (summarized) appears next to a parameter, it means that this parameter is
displayed in both the summarized and the detailed tables.
SERVER SVC
XX
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. ALL, A1...A4,
B1...B3, C1...C4,
D1...D4
ALL
[CrossConnId] C hronological sequential index marker of the
circuits. All point-to-multipoint (PMP)
cross-connect IDs of the same low port have the
same cross-connect ID.
1,2,3,4.../
n/a
Output Parameter Description Value/Field Size
[ConnId] (</s>) Same as [CrossConnId] input parameter 1,2,3,4.../
n/a
[Conn SubId] (</s>) Id of the leaf in PMP connection. If you do not specify a sub
ID, all leaves of a PMP connection identified by the
cross-connect ID will be deleted.
1,2,3,4.../
n/a
[Traffic Type] (</s>) Traffic type of the descriptor. CBR, NRTVBR,
RTVBR , UBR