SmartCell 6A000/ZX-250 Reference Manual 2-1
2 CONSOLE COMMANDS

Alarm

Use Alarm to set alarm messaging features.
Operators

show, clear, flush

Parameters
In the Output Parameter table below, (</d>) indicates parameters that are available only through the show alarm
/d (detailed) command. (</s>) (summarized) appears next to a parameter to indicate that this parameter appears in
both the summarized table and the detailed table
SERVER SVC
XX
Input Parameter Description Value/Field Size Default
[Index] Index for showing the
particular alarm. 1, 2, 3, 4.../
n/a ALL
Output Parameter Description Default
[AlarmNumber] (</s>) Numeric position of specified alarm within alarm
message buffer. 1, 2, 3, 4...
[Module] (</s>) Four-character name of the software module that
generated the log and alarm entries. See Software Modules
Tabl e under “LogTrace” .
[SubModule] (</s>) Four-character name of the software submodule that
generated the log entry that created this alarm message. See Software
SubModules Table under
“LogTrace” .