Cabletron Systems 6A000/ZX-250 Creates an IP/ATM PVC. To achieve this, you must first enter , details). You can then enter, Displays the details of an IP/ATM PVC., Removes the specified IP/ATM PVC.

2-62 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
Descriptions
Examples
switch_prompt #add pvc
ConnType(PTP) :
LowPort(A1) :
LowVPI(0) :
LowVCI(33) : 130
HighPort(A1) : b4
HighVPI(0) :
HighVCI(34) : 130
Fwd
iptorIndex(1) :
BkwTrafficDescriptorIndex(1) :
switch_prompt #
switch_prompt #show pvc all
CrossConnectId(ALL) :
Conn Conn Traffic Conn Low High Admin
Id SubId Type Type Port VPI/VCI Port VPI/VCI Status
===========================================================================
134 138 UBR PTP A1 0/130 B4(CPU) 0/130 UP
switch_prompt #
switch_prompt #add ipatmclient
ClientNumber(0) :
ServerType(NONE) :
ServerAddress() :
IPAddress() : 10.1.1.2
NetMask(255.0.0.0) :
MTU(9180) :
switch_prompt #
Operator Parameters/Permissions Description
add
ipatmpvc [ClientNumber] <clientnumber> [DestinationIP]
<destinationIP>
[DestinationVPI]<destinationVP
I>
[DestinationVCI]<destinationVC
I>
Administrator
Creates an IP/ATM PVC. To achieve this, you must first enter
add pvc (see “PVC” for more details), and then add
ipatmclient for a new client (see “IPATMClient” for more
details). You can then enter add ipatmpvc.
delete
ipatmpvc [ClientNumber] <clientnumber> [DestinationIP]
<destinationIP>
Administrator
Removes the specified IP/ATM PVC.
show
ipatmpvc [ClientNumber] <clientnumber>
Administrator
Displays the details of an IP/ATM PVC.