SmartCell 6A000/ZX-250 Reference Manual 2-161
Console Commands
Route
Use Route to administer IP (internet protocol) route management to an ATM client through an Ethernet network. It
allows network management software to communicate across a network of switches.
Operators
add, delete, show
Parameters
SERVER SVC
XX
Input Parameter Des cription Value/Field Size Default
[DestNetIP] IP network number of a remote network. dot decimal/
7-15 characters NONE
[GatewayIP] IP address for gateway to the remote network. dot decimal/
7-15 characters NONE
Output Parameter Description
[flags] The flags field is a bitmask of different options:
•0x1 – Route is usable (“up”)
•0x2 – Destination address is a gateway0x4 – Host-specific routing
entry
•0x10 – Created dynamically by ICMP redirect
•0x20 – Modified dynamically by ICMP redirect
[Refcnt] Internal/debugging info.
[Use] Number of times this route has been used to send a packet.
[Interface] Interface used for forwarding packets on this route.