Ricoh CAPLIOG4, CAPLIO G4 WIDE operation manual Error Messages, Insufficcient MEMORY. CONTINUE?

Appendices

H. Error Messages

If an error message is displayed on the LCD Monitor, take the corresponding action.

Error Message	Cause and Action	Page
INSERT CARD	No card is loaded. Insert a card.	P.16
SET DATE	The date is not set. Set the date.	P.15
FILE NUMBER OVER	The file number limit has been exceeded. Please use another card, or	P.16
	delete unwanted files.	P.100
UNMATCHED FILE	A file that cannot be played back was selected.	-
INSUFFICCIENT MEMORY. CONTINUE?	Because there is not sufficient capacity on the card, all the files cannot be	P.108
	copied. Use another card.
PROTECTED	You are trying to delete a protected file.	P.104
WRITE-PROTECTED	The card is "Locked (write-protection)". Unlock the card.	P.16
PRINT SETTINGS CANNOT BE SET FOR THIS FILE.	This file (movies and other) cannot be selected for printing.	-
INSUFFICIENT MEMORY	Files cannot be stored. Make sure there is enough free space, or delete	P.100
	files.
	The image print number limit has been exceeded. Select an image and set	P.109
	the number to 0.
FORMAT INTERNAL MEMORY	It is necessary to format internal memory.	P.115
FORMAT CARD	The card is not formatted. Format the card.	P.114
CARD ERROR	Please reformat. If, after doing so, the error message still appears, the	P.114
	card may be faulty. Do not use the card.
WRITE TO CARD	Writing file to memory. Wait until writing finishes.	-
NO FILE	There are no files that can be played back.	-
CANNOT RECORD	The Number of remaining shots is 0. Switch to another card or internal	P.16
	memory.

185