Ricoh CAPLIO G4 WIDE, CAPLIOG4 operation manual Changing Auto Power-Off Settings Auto Power OFF

Chapter 1 Section 6 Changing Camera Settings

Changing Auto Power-Off Settings (AUTO POWER OFF)

If you do not operate the camera for the set period of time, it will shut off automatically (Auto Power-off) to conserve battery power.

At the time of purchase, Auto Power-Off is set to one minute, but you can change this setting.

OFF (The Auto Power-Off function does not work) 1 Minute (Default)

5Minutes

30Minutes

To change the Auto Power-Off setting, follow the steps below.

Turn the Mode Dial to 1(Setup Mode).

The Setup Screen appears.

Press the " button to select [AUTO

POWER OFF].

Press the #$ buttons to select the desired setting.

This setting will be used until you change it.

• When Auto Power-Off turns off the camera, just press the power button again to turn it on and resume use.

• The Auto Power-off function does not work when the camera is connected to a computer.

• When shooting with Interval Shooting, settings made here are not valid and Auto Power-Off does not work.

116