Ricoh CAPLIO G4 WIDE, CAPLIOG4 operation manual Using the ADJ. Button Exposure

Chapter 1 Section 3 Using Special Features for Improved Photography

Exposure compensation setting can be adjusted by using the ADJ. Button or using the Shooting Menu.

Using the ADJ. Button (Exposure)

To change the exposure compensation set- ting using the ADJ. Button, follow the steps below.

Press the !" buttons and specify a value.

Moving it to the - (minus) side makes darker. Moving it to the + (plus) side makes it brighter. You can also press the shutter button in this state.

Turn the Mode Dial to 5(Shooting Mode).

Press the ADJ. Button.

The Exposure Compensation bar appears.

Press the O button.

Exposure Compensation settings are completed and the setting value appears in the right-hand portion of the screen.

This setting will be used for shooting until you change it.

•At purchase, the exposure compensation is set to 0.0. The setting value does not appear when the default value is set.

•If your subject is not centered when shooting against light, the camera does not recognize it in the backlight condition. In this case, adjust the exposure compensation setting.

56