Ricoh CAPLIOG4, CAPLIO G4 WIDE operation manual Playback/Deleting, Other Problems

			Appendices
Playback/Deleting
Symptom	Cause		Measure	Page
Cannot Playback. Or	It is not set to 6(Playback).		Turn the Mode Dial to 6(Playback Mode).	P.90
the Playback screen
	The AV cable was not connected properly.		Reconnect it properly.	P.99
does not come out.
	The video format is set wrong.		Set to correct format.
The contents of SD	A Memory Card is not loaded. Or a Memory Card with		Load a card with stored images.	P.16
Memory Card cannot	no stored images is loaded.
be replayed, or the
	You played back a Memory Card that was not format-		Load a card that was formatted and stored on by this	P.114
replay screen does
	ted by this device.		device.
not appear.
	You played back a Memory Card that was	not	Load a normally recorded card.	P.16
	recorded normally.
	The Memory Card's contact surfaces are dirty.		Wipe with a soft, dry cloth.	-
	There is something wrong with the Memory Card.		Play another card and if there is nothing wrong with it,	-
			the camera is OK. There may be something wrong
			with the card, so do not use it.
An image	Batteries are running low.		If using alkaline batteries, replace with a new set.	P.10
disappeared.			If using rechargeable batteries, recharge or use the	P.11
			AC Adapter.	P.12
	The camera was left unattended and not used, so Auto		Turn the power back on.	P.14
	Power-Off shut it off.
Files cannot be	The file has been set to protect.		Release the protection.	P.104
deleted.
	The SD Memory Card is "locked".		Release the "Lock (write-protection)".	P.16
Cannot format a	The SD Memory Card is "locked".		Release the "Lock (write-protection)".	P.16
Memory Card.
Other Problems
Symptom	Cause		Measure	Page
Cannot load the Mem-	The card is facing the wrong way.		Load correctly.	P.16
ory Card.
Even when the cam-	Batteries are running low.		If using alkaline batteries, replace with a new set.	P.10
era's buttons are			If using rechargeable batteries, recharge or use the	P.11
pressed, it does not			AC Adapter.	P.12
operate.
	Camera Malfunction.		Turn the power off once, turn it back on and switch to	P.14
			5(Still Image).	P.8
			Remove batteries once and load them again.	P.10
			Reconnect the AC adapter cable properly, if using.	P.11
				P.12
The date is wrong.	The correct date/time are not set.		Set the correct date/time.	P.15
The date set has dis-	The batteries were removed.		If the batteries are removed for about two weeks, the	P.15
appeared.			date setting will be lost. Make the settings again.
Auto Power-Off does	Auto Power-Off is set to OFF.		Set the time for Auto Power-Off.	P.116
not work.
The beep does not	The camera is set to silent.		Set the beep to ON.	P.117
sound.
Images do not appear	The video format is set wrong.		Set to correct format.	P.123
on the TV.
	The cable is not connected.		Reconnect the cable properly.	P.99
	The TV in/out switch is incorrectly set.		Check that the TV in/out switch is set correctly.	-

179