Ricoh CAPLIO G4 WIDE, CAPLIOG4 operation manual Using the Batteries

Chapter 1 Section 1 Getting Started

Using the Batteries

Insert the batteries following these steps.

Make sure the camera power is off.

Open the battery/card cover.

The cover slides open in two steps.

First slide the cover toward the face of the camera, then lift it to expose the battery compartment.

Insert the two batteries, making sure they are facing the correct way.

Close the battery/card cover and slide it back into place.

When the batteries wear out

Just before the batteries wear out, is displayed on the LCD Monitor. When this happens, replace the batteries with a fresh set.

•Other batteries, such as manganese dry cell (R6) and Ni-Cd, cannot be used.

•With AA Alkaline Batteries (LR6), the number of shots may differ depending on the batteries.

• Please remove the batteries if you are not going to use it for a long period of time.

10