Ricoh CAPLIO G4 WIDE, CAPLIOG4 operation manual Mode

178

Appendices

	Symptom					Cause	Measure	Page
Images do not appear					The power is not on. Or the LCD Monitor is dark.		Turn the power on. Or adjust the brightness of the LCD	P.14
on the LCD Monitor.							Monitor.	P.120
					The AV cable is connected.		Disconnect the AV cable.	P.99
					The screen display status is in [SYNCHRO-MONITOR		Press the DISP button and switch display.	P.22
					MODE].
					It is set to [Power-Save].		Set [Power-Save] to off.	P.121
Although it is set to					The lens is dirty.		Wipe clean with a soft, dry cloth.	-
Auto	Focus,		it does
					The subject is not in the center of the shooting range.		Shoot with Focus Lock.	P.36
not focus.
					It is a hard-to-focus subject.		Shoot with Focus Lock or Manual Focus.	P.36
								P.71
The	flash	does		not	The Shooting Mode is set to R (Multi-Shot) or 3		Switch the Shooting Mode to 5(Still Image).	P.49
fire. Or the flash can-					(Movie).
not recharge.
					The flash is set to	(Flash Off).	Set to Flash Off with the Fbutton.	P.49
					The White Balance is set to something other than Auto		Set the White Balance to Auto mode.	P.58
					mode.
					Batteries are running low.		If using alkaline batteries, replace with a new set.	P.10
							If using rechargeable batteries, recharge or use the	P.11
							AC Adapter.	P.12
Even though the flash					The distance to the subject is greater than 2.5 meters		Get closer to your subject and shoot.	P.49
fired,	the	picture is			in Telephoto or greater than 3.0 meters in Wide-angle.
dark.
The image is too					You are too close to the subject.		Set to Flash Off with the Fbutton.	P.49
bright.
					It is over-exposed.		Use exposure compensation. Cancel Exposure Time.	P.55
								P.78
					The brightness of the LCD Monitor is odd.		Adjust the brightness of the LCD Monitor.	P.120
The image is too dark.					The shot was taken	in a dark place while set to	Release the Flash Off with the Fbutton.	P.49
					(Flash Off).
					It is under-exposed.		Use exposure compensation. Set to Exposure Time.	P.55
								P.78
					The brightness of the LCD Monitor is odd.		Adjust the brightness of the LCD Monitor.	P.120
The image lacks				nat-	The picture was shot in conditions that are hard for		Add a white object to the composition. Or use Auto	P.58
ural color.					Auto White Balance to adjust to.		Balance in a setting other than Flash shooting or Auto
							Mode.
The date, or recording					The screen display function is set to No Display.		Press the DISP button and switch display.	P.22
information		does		not
appear.
The brightness of the					You are using it in a dark place or when Auto Focus		This is normal.	-
LCD Monitor changes					range and surrounding brightness are different.
during AF.
There is		a	vertical		This is a phenomenon that occurs when a bright sub-		This is normal.	-
smear on the image.					ject is shot. It is called the smear phenomenon.