Ricoh CAPLIOG4 Changing the Edge Quality of Still Images, Select Sharpness and then press

Chapter 1 Section 3 Using Special Features for Improved Photography

Changing the Edge Quality of Still Images

(SHARPNESS)

You can change the definition of your still images to either sharp or soft.

At purchase, your camera is set to Normal.	Select [SHARPNESS] and then press the
	O button.

To make changes to the sharpness of still images, follow the steps below.

Press the !" buttons to select the desired setting.

Turn the Mode Dial to 5(Shooting Mode).

Press the Mbutton.

The Shooting menu appears.

Press the O button.

Sharpness settings are complete.

Press the M button.

The Shooting Menu closes and the setting value is displayed on the right of the screen.

Press the #$ buttons to switch between displays as required.

This setting will be used for shooting until you change it.

75