Ricoh CAPLIO G4 WIDE, CAPLIOG4 operation manual Switching the Screen Display, When Shooting

Chapter 1 Section 1 Getting Started

Switching the Screen Display

If you press DISP, you can change the screen display mode, such as switching between display/no dis- play of symbols, etc.

When Shooting

Display Symbols No Display Grid Guide Display Synchro-Monitor Mode

DISP button

•In Synchro-Monitor Mode, with the exception of the following operations, the LCD Monitor is turned off (No Display). This is a useful mode to reduce power consumption.

Half-press the shutter button.	The LCD Monitor is tuned on and you can confirm composition. After you finish shooting with
	Full-Press, the LCD Monitor will automatically turn off.
Press the Q(Quick Review) button.	You can view the photo you just took (see P.87). By pressing the Q (Quick Review) button
	again, you can turn the LCD Monitor off.
Press the Mbutton.	The LCD Monitor Display is turned on and you can make various settings for shooting (see
	P.24). By pressing the Mbutton again, you can turn the LCD Monitor off.
ADJ. Button.	The LCD Monitor Display is turned on and you can make settings for exposure control, white
	balance, and ISO sensitivity (see P.55, 58, and 63). Pressing the OK button turns the LCD
	Monitor off.

•You cannot turn the LCD Monitor Display on/off by pressing T (Self-timer), F (Flash) or N (Macro) buttons.

•Turning the LCD Monitor Display Off conserves battery life. In this case, shoot using just the Viewfinder.

•In Voice Memo Mode, you can turn the LCD Monitor Display off by pressing the DISP button.

When the No Display or Grid Guide Display is on, symbols will appear for a few seconds right after you have pressed Self-timer, Flash or Macro button.

For how to display the grid guide, see P.83.

When Playing Back

Display Symbols No Display

DISP button

22