Appendices
•For Windows XP
Step 1 First, follow the steps below.
1.Load the Caplio
2.Connect your camera via the USB cable to your computer.
3.Click the [Start] button on the Windows taskbar to display the [Start] menu.
4.On the [Start] menu, click [Control Panel].
5.On the Control Panel displayed, click [Switch to Classic Display]. The display changes its appearance and the [Sys- tem] icon appears.
6.
7.On the [System Properties] screen displayed, click the [Hardware] tab.
8.On the [Hardware] tab page displayed, click the [Device Manager] button.
9.On the [Device Manager] screen displayed, click [+] on the left side of [Other Devices].
10.Check if there is [Caplio G4] below it. If there is,
11.Windows XP will display the [Hardware Update Wizard] screen.
12.Make sure that [Install the software automatically (Recommended)] is selected, and then click [Next].
13.When the [Completing the Hardware Update Wizard] screen appears, click [Finish].
14.Click the [x] (Close) button to close the [Device Manager] screen.
15.Click [OK] to close the [System Properties] screen.
16.Click the [x] (Close) button to close the Control Panel.
17.Turn off your camera and computer.
18.Turn your computer back on and reinstall the software from the
19.Connect your camera via the USB cable to your computer. When the computer recognizes the camera, the [New Hardware] screen launches and your camera is registered by the computer.
Step 2 If your computer still does not recognize the camera, follow the steps below.
1.Load the Caplio
2.Connect your camera via the USB cable to your computer.
3.Click the [Start] button on the Windows taskbar to display the [Start] menu.
4.On the [Start] menu, click [Control Panel].
5.On the Control Panel displayed, click [Switch to Classic Display]. The display changes its appearance and the [Sys- tem] icon appears.
6.
7.On the [System Properties] screen displayed, click the [Hardware] tab.
8.On the [Hardware] tab page displayed, click the [Device Manager] button.
9.On the [Device Manager] screen displayed, click [+] on the left side of [##Imaging Devices##].
10.Check whether or not there is an unknown device symbol (!) indicated for [Caplio G4]. If there is,
11.Windows XP will display the [Hardware Update Wizard] screen.
12.Make sure that [Install the software automatically (Recommended)] is selected, and then click [Next].
13.When the [Completing the Hardware Update Wizard] screen appears, click [Finish].
14.Click the [x] (Close) button to close the [Device Manager] screen.
15.Click [OK] to close the [System Properties] screen.
16.Click the [x] (Close) button to close the Control Panel.
183
