Ricoh CAPLIO G4 WIDE, CAPLIOG4 operation manual White Balance is set

Chapter 1 Section 3 Using Special Features for Improved Photography

If you select (One Push)

Press !" to select (One Push).

Point the camera at a piece of paper or something white under the lighting condi- tions for your picture.

Press the $ button.

White Balance is set.

Press the O button.

White Balance settings are completed and the symbol appears in the upper left of the screen.

This setting will be used for shooting until you change it.

If you press the $ button in step , the screen refreshes to show the White Balance settings made. If

the result is not as expected, repeat steps and to change the settings as many times as required.

•In Auto Mode, white balance may not be adjusted correctly for a mostly dark subject. In this case, add something white as the subject.

•When shooting with flash, white balance may not be adjusted correctly in Daylight, Overcast, Tungsten light, or One Push mode. In this case, switch to Auto Mode for shooting with flash.

When shooting with flash in a mode other than Auto, the white balance may not be adjusted correctly.

60