Ricoh CAPLIO G4 WIDE, CAPLIOG4 operation manual Changing Shading for Shooting Text Density

Chapter 1 Section 3 Using Special Features for Improved Photography

Changing Shading for Shooting Text (DENSITY)

When you are shooting text, you can change the DENSITY settings. You can select from DEEP, NOR- MAL and LIGHT.

Text Density setting can be adjusted by using the ADJ. Button or using the Shooting Menu.

For information on how to shoot text, see P.37.

Using the ADJ. Button (Text Density)

To change the Text Density setting using the ADJ. Button, follow the steps below.

Turn the Mode Dial to 4(Scene Mode).

The Scene selection screen appears.

Press the !" buttons to select the text mode and then press the O button.

Press the ADJ. Button.

The Text Density menu appears.

Press the !" buttons to select the desired density setting.

You can also press the shutter button in this state.

Press the O button.

Text Density settings are completed.

The Text Density setting value does not appear on the screen. This setting will be used for shooting until you change it.

At purchase, the Text Density is set to Normal.

84