Ricoh CAPLIOG4, CAPLIO G4 WIDE operation manual Setting the Date and Time Date Settings

Chapter 1 Section 1 Getting Started

Setting the Date and Time (DATE SETTINGS)

You can take still images with the time or date stamped onto the picture.

Immediately after purchasing the camera, the date and time settings will not be correct, so be sure to set the date and time before using this feature.

To set the date and time, follow the steps below.

Set the year, month, date and time by pressing !"#$.

If you hold down the !" buttons, you can increase/ decrease the value quickly.

Make sure the power is on and then turn the Mode Dial to 1 (Setup Mode).

The Setup screen is displayed on the LCD Monitor.

Press the " button to select [DATE SET- TINGS] and then press the O button.

In [FORMAT], choose the Date and Time format.

Check the display on the bottom of the screen and then press the O button.

Once you have set the date and time, the display returns to the Setup screen.

If the batteries are removed for about two weeks, the date and time settings will be lost. These settings must be made again.

15