Ricoh CAPLIO G4 WIDE, CAPLIOG4 operation manual Press the M button

Chapter 1 Section 3 Using Special Features for Improved Photography

If you select (One Push)

Press !" to select (One Push).

Press the O button.

White Balance settings are complete.

Press the M button.

The Shooting Menu closes and the setting value is displayed on the upper left of the screen.

This setting will be used for shooting until you change it.

If you press the $ button in step, the screen refreshes showing the White Balance settings made.

If the result is not as expected, repeat steps and to change the settings as many times as required.

Point the camera at a piece of paper or something white under the lighting condi- tions for your picture.

Press the $ button.

White Balance is set.

• In Auto Mode, white balance may not be adjusted correctly for a mostly dark subject. In this case, add something white as the subject.

• When shooting with flash, white balance may not be adjusted correctly in Daylight, Overcast, Tungsten light, or One Push mode. In this case, switch to Auto Mode for shooting with flash.

When shooting with flash in a mode other than Auto, the white balance may not be adjusted correctly.

62