Ricoh CAPLIO G4 WIDE For Windows XP, Click Install Software Select a language and then click OK

Chapter 2 Section 1 Installing Software

For Windows XP

In Windows XP, only a user with administra- tive privileges can install the software.

Make sure that your camera is not con- nected to the computer.

If you have already connected your camera to the computer and the [Found New Hardware Wizard] screen was displayed, click [Cancel], disconnect the cable between the camera and computer, and then continue installation.

Start your computer.

Insert the CD-ROM in the CD-ROM drive.

The following screen appears automatically on your computer screen.

Click [Install Software].

Select a language and then click [OK].

After a few moments, the [Welcome to InstallShield Wizard] screen appears.

Click [Next] .

After a few moments, the [Choose Destination Loca- tion] screen appears.

Confirm where you want to install the software and then click [Next].

After a few moments, the [Select Components] screen appears.

Confirm the software you want to install and then click [Next].

Thereafter, if you continue the operation by following the messages, the [Finish] screen of the [InstallShield Wizard] will appear.

If a message appears asking you whether you want to restart your computer, select [Yes, restart my com- puter now.] then click [Finish]. The computer will restart.

If the screen from step is not displayed automatically, take the following steps.

1. Click the [Start] button on the task bar and then select [My Computer] from the start menu.

2.Double-click the CD-ROM drive icon displayed in the [My Computer] window.

3.Double-click the AutoRun file (Autorun.exe) displayed in the CD-ROM drive window.

130