Cabletron Systems 9032578-05 manual Configuration Examples, Assigning IP/IPX Interfaces

Chapter 8: IP Routing Configuration Guide

Configuration Examples

Assigning IP/IPX Interfaces

To enable routing on the SSR, you must assign an IP or IPX interface to a VLAN. To assign an IP or IPX interface named ‘RED’ to the ‘BLUE’ VLAN, enter the following command:

ssr(config)# interface create ip RED address-netmask 10.50.0.1/255.255.0.0 vlan BLUE

You can also assign an IP or IPX interface directly to a physical port.

90 SmartSwitch Router User Reference Manual