Cabletron Systems 9032578-05 manual 174

Chapter 13: Routing Policy Configuration Guide

•Specify the static routes configured on the router

•Determine its OSPF configuration

!++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

!Create the various IP interfaces. !++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

interface create ip to-r2 address-netmask 120.190.1.1/16 port et.1.2

interface create ip to-r3 address-netmask 130.1.1.1/16 port et.1.3 interface create ip to-r41 address-netmask 140.1.1.1/24 port et.1.4 interface create ip to-r42 address-netmask 140.1.2.1/24 port et.1.5 interface create ip to-r6 address-netmask 140.1.3.1/24 port et.1.6 !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

!Configure default routes to the other subnets reachable through R2. !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

ip add route 202.1.0.0/16 gateway 120.1.1.2 ip add route 160.1.5.0/24 gateway 120.1.1.2

!++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

!OSPF Box Level Configuration !++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

ospf start

ospf create area 140.1.0.0 ospf create area backbone ospf set ase-defaults cost 4

!++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

!OSPF Interface Configuration !++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

ospf add interface 140.1.1.1 to-area 140.1.0.0 ospf add interface 140.1.2.1 to-area 140.1.0.0 ospf add interface 140.1.3.1 to-area 140.1.0.0 ospf add interface 130.1.1.1 to-area backbone

Exporting All Interface & Static Routes to OSPF

Router R1 has several static routes. We would like to export all these static routes and direct-routes (routes to connected networks) into OSPF.

ip-router policy redistribute from-proto static to-proto ospf ip-router policy redistribute from-proto direct to-proto ospf

Note: The network parameter specifying the network-filter is optional. The default value for this parameter is all, indicating all networks. Since in the above example, we would like to export all static and direct routes into OSPF, we have not specified this parameter.

Exporting All RIP, Interface & Static Routes to OSPF

Note: Also export interface, static, RIP, OSPF, and OSPF-ASE routes into RIP.

174 SmartSwitch Router User Reference Manual