Cabletron Systems 9032578-05 manual Displaying Rmon Information

Chapter 23: RMON Configuration Guide

•Samples taken at 300 second (5 minute) intervals.

•A “Startup” alarm generation condition instructing the SSR to generate an alarm if the sample is greater than or equal to the rising threshold or less than or equal to the falling threshold.

•Compare value at time of sampling (absolute value) to the specified thresholds.

•Rising and falling threshold values are 1.

•Rising and falling event index values are 15, which will trigger the previously- configured Event.

ssr#(config) rmon alarm index 20 variable 1.3.6.1.2.1.31.1.5.0 interval 300 startup both type absolute-value rising-threshold 1 falling- threshold 1 rising-event-index 15 falling-event-index 15 owner "help desk"

Displaying RMON Information

The CLI rmon show commands allow you to display the same RMON statistics that can be viewed from a management station. To display RMON statistics for the SSR, use the following CLI command lines in Enable mode:

1To show Ethernet statistics.	rmon show etherstats <port-list>all-ports
To show all events and logs.	rmon show events
To show all alarms.	rmon show alarms
To show histories and logs.	rmon show history <port-list>all-ports
To show hosts and logs.	rmon show hosts <port-list>all-ports [summary]
To show all Host Top N and	rmon show host-top-n
logs.
To show matrices and logs.	rmon show matrix <port-list>all-ports
To show all channels.	rmon show channels
To show all filters.	rmon show filters
To show all packet captures	rmon show packet-capture
and logs.
To display the RMON 2	rmon show protocol-directory
Protocol Directory.
To display the RMON 2	rmon show protocol-distribution <port-list>all-
Protocol Distribution.	ports

322 SmartSwitch Router User Reference Manual