Monitoring PoS Ports, Threshold | Cabletron Systems 9032578-05

Chapter 6: Packet-over-SONET Configuration Guide

•Signal failure BER threshold of 10-3(1 out of 1,000 bits transmitted is in error). Signal failure is associated with a “hard” failure. Signal fail is determined when any of the following conditions are detected: loss of signal (LOS), loss of frame (LOF), line alarm indication bridge and selector signal (AIS-L), or the BER threshold exceeds the configured rate.

To specify different BER thresholds, enter the following commands in Enable mode:

Specify signal degrade BER	sonet set <port> sd-ber <number>
threshold.

Specify signal failure BER	sonet set <port> sf-ber <number>
threshold.

Monitoring PoS Ports

To display PoS port configuration information, enter one of the following commands in Enable mode:

Show framing status, line type, and circuit	sonet show medium <port list>
ID of the optical link.

Show working or protecting line, direction,	sonet show aps <port list>
and switch status.

Show received path trace.	sonet show pathtrace <port list>

Show loopback status.	sonet show loopback <port list>

The following table describes additional monitoring commands for IP interfaces for PoS links, designed to be used in Enable mode:

Display bridge NCP statistics for	ppp show stats port <port name> bridge-
specified PoS port.	ncp

Display IP NCP statistics for	ppp show stats port <port name> ip-ncp
specified PoS port.

Display link-status statistics for	ppp show stats port <port name> link-
specified PoS port.	status

Display summary information for	ppp show stats port <port name> summary
specified PoS port.

62	SmartSwitch Router User Reference Manual

Image 88

Cabletron Systems 9032578-05 manual Monitoring PoS Ports, Specify signal degrade BER, Threshold Specify signal failure BER

Contents

SmartSwitch Router User Reference Manual 9032578-05 Copyright ChangesDisclaimer Trademarks Regulatory Compliance Information Regulatory Compliance Statements Industry Canada Compliance Statement Vcci Compliance Statement Safety Information Class 1 Laser Transceivers Laser Radiation and Connectors Cabletron Systems, Inc Program License Agreement SmartSwitch Router User Reference Manual Vii Viii SmartSwitch Router User Reference Manual SmartSwitch Router User Reference Manual Cabletron Systems Limited Program License Agreement Cabletron Systems Limited Program License Agreement Declaration of Conformity Addendum Contents SmartTRUNK Configuration Guide Dhcp Configuration Guide Vrrp Configuration Guide 111 Routing Policy Configuration Guide 161 160 197 Network Address Translation Configuration Guide Firewall Load Balancing 214 Monitoring IP Policies 215 249 Security Configuration Guide 275 QoS & Layer-2/Layer-3/Layer-4 Flow Overview 291 309 Lfap Configuration Guide 329 357 Contents Xxvi SmartSwitch Router User Reference Manual About This Manual Related DocumentationDocument Conventions For Information About See Keywords and arguments within a set of square brackets are OptionalKeywords or arguments separated by vertical bars indicate a Choice. Select one keyword or argument Configuration Files Chapter Introduction Using the Command Line Interface Command ModesUser Mode Enable Mode Configure Mode Getting Help with CLI CommandsBoot Prom Mode CLI completes the command as follows Line Editing Commands CLI Line Editing Commands Next command from history buffer Previous command from history bufferWord-backward command Show all commands currently stored in the history buffer Displaying and Changing Configuration Information Commands to Display and Change Configuration Information Task Command Erase scratchpadErase startup Save active Port Names Each port in the SSR is referred to in the following mannerPort Numbers for Line Cards Line Card Port Number Arrangement Left to Right Base LLX Quad Serial WAN Hssi WAN Chapter Hot Swapping Line Cards Control Modules Hot Swapping Overview Hot Swapping Line Cards Deactivating the Line Card Removing the Line Card Installing a New Line CardHot Swapping One Type of Line Card With Another Hot Swapping a Secondary Control Module Deactivating the Control Module Installing a Control Module Removing the Control Module Hot Swapping a Switching Fabric Module SSR 8600 only Removing the Switching Fabric Module Installing a Switching Fabric ModulePage Bridging Overview Chapter Bridging Configuration GuideSpanning Tree Ieee 802.1d Vlan Overview Bridging Modes Flow-Based and Address-Based Port-based VLANs MAC-address-based VLANsProtocol-based VLANs Subnet-based VLANs SSR Vlan Support Multicast-based VLANsPolicy-based VLANs VLANs and the SSR Access Ports and Trunk Ports 802.1Q support Ports, VLANs, and L3 Interfaces Configuring Address-based or Flow-based Bridging Configuring SSR Bridging FunctionsExplicit and Implicit VLANs SSR Address-Based Bridge Table Flow-Based Bridge Table Adjusting Spanning-Tree Parameters Configuring Spanning TreeMore ports for a particular Vlan Setting a Port Priority Setting the Bridge PriorityAssigning Port Costs Adjusting Bridge Protocol Data Unit Bpdu Intervals Adjusting the Interval between Hello TimesDefining the Forward Delay Interval Defining the Maximum Age Configuring a Port- or Protocol-Based Vlan Configuring Vlan Trunk PortsCreating a Port or Protocol Based Vlan Adding Ports to a Vlan Configuring VLANs for Bridging Configuring Layer-2 Filters Monitoring Bridging Configuration ExamplesCreating an IP or IPX Vlan Creating a non-IP/non-IPX Vlan Next, assign ports to the ‘RED’ Vlan Chapter SmartTRUNK Configuration Guide Overview Creating a SmartTRUNK Configuring SmartTRUNKsAdd Physical Ports to the SmartTRUNK Monitoring SmartTRUNKs Specify Traffic Distribution Policy Optional Example Configurations St.2 St.4 Router Switch Server SmartTRUNK Configuration Guide Page ATM Overview Chapter ATM Configuration GuideVirtual Channels Creating a Virtual Channel Service Class DefinitionAtm create vcl port port list Creating a Service Class Definition Applying a Service Class Definition Enabling Cell Scrambling Cell ScramblingAtm set port port list pdh-cell-scramble on off Cell Mapping Selecting the Cell Mapping FormatPdh-cell-scramble onoff Atm set port port list cell-mapping direct plcp Creating a Non-Zero VPI Setting the Bit Allocation for VPIAtm set port port list vpi-bits num Displaying ATM Port Information Atm show vpl port port list all-ports Atm show serviceall Atm show port-settings port list all-ports B3ZS Esf indicates extended super frame and is used For T1 framingG832 is used for E3 framing G751 is used for E3 framing ATM Sample Configuration Consider the following network configuration Configuring an Interface on an Ethernet Port Defining an ATM Service Class Configuring an Interface on an ATM Port Applying an ATM Service ClassConfiguring an IP Route Ssr1config# ip add route 11.1.2.0/24 gateway ATM Sample Configuration Chapter Packet-over-SONET Configuration Guide Configuring Packet-over-SONET Links Configuring IP Interfaces for PoS Links Configuring Automatic Protection Switching Configuring Working and Protecting Ports Specifying Bit Error Rate Thresholds Specify signal degrade BER Threshold Specify signal failure BERMonitoring PoS Ports Threshold This section shows example configurations for PoS links Following is the configuration for router aFollowing is the configuration for router B APS PoS Links Between SSRs PoS Link Between the SSR and a Cisco Router Router So.6.1 So-1 40.1.1.1/16 Bridging and Routing Traffic Over a PoS Link Router So.6.1Page Chapter Configuration GuideDhcp Overview Configuring Dhcp Configuring an IP Address PoolConfiguring Client Parameters Client Parameters Configuring a Static IP Address Grouping Scopes with a Common Interface Updating the Lease Database Configuring Dhcp Server ParametersMonitoring the Dhcp Server Dhcp Configuration Examples Define Dhcp network parameters for the scope ‘scope1’Define an IP address pool for addresses 10.1.1.10 through Define a static IP address for Configuring Secondary Subnets Secondary Subnets and Directly-Connected Clients Include ‘scope2’ in the superscope ‘super1’ Interacting with Relay Agents Define the address pool for ‘scope1’ Page IP Routing Protocols Chapter IP Routing Configuration GuideUnicast Routing Protocols Configuring IP Interfaces and Parameters Multicast Routing Protocols Configuring IP Interfaces for a Vlan Configuring IP Interfaces to PortsSpecifying Ethernet Encapsulation Method Configuring Jumbo Frames Configuring Address Resolution Protocol ARP Configuring ARP Cache EntriesTo clear the entire ARP table Unresolved MAC Addresses for ARP Entries Configuring Reverse Address Resolution Protocol Rarp Configuring Proxy ARP Specifying IP Interfaces for Rarp Defining MAC-to-IP Address Mappings Configuring DNS Parameters Configuring IP Services IcmpConfiguring IP Helper Monitoring Rarp Configuring Direct Broadcast Configuring Denial of Service DOS Monitoring IP Parameters Configuring Router Discovery Arp show allInterface show ip System show dns Ssrconfig# rdisc add address To display router discovery information Ssr# rdisc show all Assigning IP/IPX Interfaces Configuring Vrrp Vrrp Overview Basic Vrrp Configuration BackupConfiguration of Router R1 Following is the configuration file for Router R1 in Figure Configuration for Router R2 Symmetrical ConfigurationFollowing is the configuration file for Router R2 in Figure Master for VRID=1 Master for VRID=2 Backup for VRID=2 Symmetrical Vrrp Configuration Multi-Backup Configuration Configuration of Router R2 Multi-Backup Vrrp Configuration Configuration of Router R1 Virtual Router Default Priority Configured Priority Configuration of Router R3 Additional ConfigurationFollowing is the configuration file for Router R3 in Figure Setting the Advertisement Interval Setting the Backup PrioritySetting Pre-empt Mode Monitoring Vrrp Setting an Authentication KeyIp-redundancy trace Ip-redundancy show Ssr# ip-redundancy show vrrp interface int1 Vrrp Configuration Notes Ssr# ip-redundancy show vrrp 1 interface int1 verbose 104 Configuring RIP Chapter RIP Configuration GuideRIP Overview Configuring RIP Parameters Configuring RIP InterfacesEnabling and Disabling RIP Set the authentication method Characters Set the authentication methodTo RIP Specify that RIP V2 packets Configuring RIP Route Default-Metric Configuring RIP Route PreferenceMonitoring RIP Configuration Example 110 Ospf Ospf Overview Configuring Ospf Ospf Multipath Enabling Ospf Configuring Ospf Interface ParametersOspf Interface Parameters Ospf Default Cost Per Port Type Default Cost of an Ospf InterfacePort Media Type Speed Ospf Default Cost Create an Ospf area Configuring an Ospf AreaAdd an interface to an Ospf area Configuring Ospf Area Parameters Creating Virtual LinksAdd a stub host to an Ospf area Add a network to an Ospf area for Configuring Ospf for Different Types of Interfaces Create a virtualLink Set virtual link Monitoring Ospf Monitor Ospf error conditions Configured for OspfShow Ospf errors Show information about all interfaces Ospf Configuration Examples Routes Show Ospf timersShows information about all valid next Shows information about Ospf Border Exporting All Interface & Static Routes to Ospf Exporting All RIP, Interface & Static Routes to Ospf Create a Ospf export destination for type-1 routes Create a Ospf export destination for type-2 routesCreate a RIP export source Create a Static export source Create Ospf export source Create a RIP export destinationCreate OSPF-ASE export source R10 Chapter BGP Configuration Guide BGP Overview Basic BGP Tasks SSR BGP Implementation Setting the Autonomous System Number Setting the Router IDConfiguring a BGP Peer Group Ip-router global set autonomous-system num1 loops num2 Where Autonomous-system number Adding and Removing a BGP Peer Using AS-Path Regular ExpressionsStarting BGP 130 AS-Path Regular Expression Examples Using the AS Path Prepend FeatureTo import MCI routes with a preference BGP Configuration Examples Following is an example BGP Peering Session Example AS-1 AS-2 CLI configuration for router SSR1 is as followsPhysical Link Peering Relationship Ibgp Configuration Example CLI configuration for router SSR2 is as followsGated.conf file for router SSR1 is as follows Gated.conf file for router SSR2 is as follows Ibgp Routing Group Example Sample Ibgp Configuration Routing Group Type AS-64801 Following lines in the Cisco router configure Ospf Ibgp Internal Group Example Illustrates a sample Ibgp Internal group configuration Sample Ibgp Configuration Internal Group Type SmartSwitch Router User Reference Manual 141 Configuration for router C1 a Cisco router is as follows Ebgp Multihop Configuration ExampleConfiguration for router C2 a Cisco router is as follows AS-64800 Physical Link CLI configuration for router SSR3 is as follows CLI configuration for router SSR4 is as follows Community Attribute ExampleGated.conf file for router SSR3 is as follows Gated.conf file for router SSR4 is as follows Sample BGP Configuration Specific Community Sample BGP Configuration Well-Known Community , router SSR11 has the following configuration , router SSR13 has the following configuration , router SSR10 has the following configuration , router SSR14 has the following configuration SmartSwitch Router User Reference Manual 151 Local Preference Examples Sample BGP Configuration Local Preference Using the set-pref Option Using the local-pref OptionFor router SSR13, local-prefis set to Sample BGP Configuration MED Attribute Multi-Exit Discriminator Attribute Example Router SSR6 has the following CLI configuration Ebgp Aggregation ExampleAS-64900 AS-64901 Router SSR9 has the following CLI configuration Router SSR8 has the following CLI configurationRoute Reflection Example Shows a sample configuration that uses route reflection AS-64902 SmartSwitch Router User Reference Manual 159 160 Chapter Routing Policy Configuration Guide Route Import and Export Policy Overview Preference Defined by CLI Command Default Default Preference ValuesPreference Import Policies Import-Source Export Policies Route-FilterExport-Destination Export-Source Specifying a Route Filter Aggregates and Generates Aggregate-Destination Aggregate-Source Authentication Authentication Methods Configuring Simple Routing Policies Authentication Keys and Key Management Redistributing Static Routes Redistributing Directly Attached Networks Redistributing RIP into RIP Redistributing RIP into OspfRedistributing Ospf to RIP Redistributing Aggregate Routes Simple Route Redistribution Examples To redistribute aggregateRoutes into Ospf Example 1 Redistribution into RIP Exporting All Static Routes to All RIP Interfaces Exporting a Given Static Route to All RIP InterfacesExample 2 Redistribution into Ospf 174 Configuring Advanced Routing Policies 176 Creating an Export Destination Creating an Export Source Creating an Import Source Creating a Route FilterCreate a RIP import Destination Create an Ospf import Creating an Aggregate Route Creating an Aggregate Destination Creating an Aggregate SourceExamples of Import Policies Example 1 Importing from RIP R41 182 Rip add source-gateways 140.1.1.41 rip add trusted-gateways Example 2 Importing from Ospf 185 Routing Policy Configuration Importing a Selected Subset of OSPF-ASE Routes Examples of Export Policies Example 1 Exporting to RIP 188 Exporting a Given Static Route to a Specific RIP Interface 190 Exporting Aggregate-Routes into RIP Example 2 Exporting to Ospf SmartSwitch Router User Reference Manual 193 194 SmartSwitch Router User Reference Manual 195 196 IP Multicast Overview Chapter Multicast Routing Configuration GuideIgmp Overview Dvmrp Overview Configuring Igmp Configuring Igmp on an IP InterfaceConfiguring Igmp Query Interval Configuring Igmp Response Wait Time Configuring Dvmrp Configuring Per-Interface Control of Igmp MembershipConfiguring Static Igmp Groups Ship to a specific group Configuring Dvmrp Parameters Configuring Dvmrp on an InterfaceStarting and Stopping Dvmrp Configuring the Dvmrp Routing Metric Configuring Dvmrp TTL & Scope Configuring a Dvmrp Tunnel Monitoring Igmp & DvmrpShows all the interfaces Membership details running Igmp Memberships on a port basis Show all Igmp timers Shows all Igmp groupShow information about multicasts Registered by Igmp Show Igmp status on a Vlan SmartSwitch Router User Reference Manual 205 206 Chapter IP Policy-Based Forwarding Configuration Guide Defining an ACL Profile Configuring IP PoliciesAssociating the Profile with an IP Policy Setting the IP Policy Action Creating Multi-Statement IP Policies Applying an IP Policy to an Interface Setting Load Distribution for Next-Hop GatewaysApplying an IP Policy to Locally Generated Packets IP Policy Configuration Examples Routing Traffic to Different ISPs Prioritizing Service to Customers Using an IP Policy to Prioritize Service to Customers Authenticating Users through a Firewall Using an IP Policy to Authenticate Users Through a Firewall Firewall Load Balancing Selecting Next Hop Gateway from IP Packet Information Following is the configuration for Policy Router 1 in Figure Monitoring IP Policies Ssr# ip-policy show policy-name p1 SmartSwitch Router User Reference Manual 217 218 Chapter Network Address Translation Configuration Guide Configuring NAT Setting Inside and Outside Interfaces Setting NAT Rules Forcing Flows through NATStatic Dynamic Managing Dynamic Bindings NAT and DNS Specify the FTP session timeout NAT and Icmp PacketsNAT and FTP Specify the FTP control port Static Configuration This section shows examples of NAT configurationsMonitoring NAT Next, define the interfaces to be NAT inside or outside Dynamic Configuration Using Static NAT Using Dynamic NAT Dynamic NAT with IP Overload PAT Configuration Using Dynamic NAT with IP Overload Dynamic NAT with DNS DNS Using Dynamic NAT with DNS Dynamic NAT with Outside Interface Redundancy Using Dynamic NAT with Matching Interface Redundancy Chapter Web Hosting Configuration Guide Configuring Load Balancing Load BalancingCreating the Server Group Adding Servers to the Load Balancing Group Session Persistence Persistence Default Binding Level Timeout Sticky Minutes Specifying Load Balancing Policy Optional Group or Server Operating ParametersSpecifying a Connection Threshold Verifying Servers and Applications Verifying Extended Content Setting Server StatusSpecify application verification Setting Timeouts for Load Balancing Mappings Allowing Access to Load Balancing ServersLoad Balancing and FTP Configuration Examples Displaying Load Balancing Information Web requests forwarded to One of the servers Router 10.1.1.4 Internet Web requests Domain Name Virtual IP TCP Port Real Server Virtual IP Address Ranges 207.135.89.16 207.135.89.17 207.135.89.18 207.135.89.50 Session and Netmask Persistence Web Caching Configuring Web CachingCreating the Cache Group Specifying the Clients for the Cache Group Optional Redirected to cache serversNot redirected to cache servers Redirecting Http Traffic on an Interface Other Configurations Configuration ExampleBypassing Cache Servers Monitoring Web-Caching Distributing Frequently-Accessed Sites Across Cache ServersProxy Server Redundancy Show caching policy information Show cache server information IPX Routing Overview Chapter IPX Routing Configuration GuideRIP Routing Information Protocol SAP Service Advertising Protocol Creating IPX Interfaces Configuring IPX RIP & SAPIPX Addresses Configuring IPX Interfaces and Parameters Configuring IPX Addresses to PortsConfiguring Secondary Addresses on an IPX Interface Configuring IPX Interfaces for a Vlan Configuring IPX Routing Specifying IPX Encapsulation MethodEnabling IPX RIP Enabling SAP Configuring Static Routes Configuring Static SAP Table EntriesControlling Access to IPX Networks Creating an IPX Access Control List Creating an IPX Type 20 Access Control List Creating an IPX SAP Access Control List Creating an IPX GNS Access Control List Creating an IPX RIP Access Control List Monitoring an IPX Network 258 Chapter Access Control List Configuration Guide ACL Basics Defining Selection Criteria in ACL Rules SmartSwitch Router User Reference Manual 261 How ACL Rules are Evaluated Implicit Deny Rule Allowing External Responses to Established TCP Connections Creating and Modifying ACLs Following ACL illustrates this featureEditing ACLs Offline Maintaining ACLs Using the ACL Editor Applying ACLs to Interfaces Using ACLsThese uses of ACLs are described in the following sections Applying ACLs to Services Applying ACLs to Layer-4 Bridging Ports Using ACLs as Profiles SSR Feature ACL Profile Usage Using Profile ACLs with the IP Policy Facility Using Profile ACLs with the Traffic Rate Limiting Facility Using Profile ACLs with Dynamic NAT Using Profile ACLs with the Port Mirroring Facility Using Profile ACLs with the Web Caching Facility Redirecting Http Traffic to Cache Servers Preventing Web Objects From Being Cached Enabling ACL Logging Monitoring ACLs Chapter Security Configuration Guide Security Overview Configuring SSR Access Security Configuring Radius Monitoring Radius Configuring TacacsMonitoring Tacacs Configuring Tacacs Plus Layer-2 Security Filters Configuring PasswordsMonitoring Tacacs Plus Configuring Layer-2 Address Filters Configuring Layer-2 Port-to-Address Lock Filters Configuring Layer-2 Static Entry FiltersConfigure a source static Configure a destination static Configuring Layer-2 Secure Port Filters Configure a source secure portConfigure a destination secure Port filter Monitoring Layer-2 Security Filters Layer-2 Filter Examples Static Entries Example Port-to-Address Lock Examples Layer-3 Access Control Lists ACLs Example 2 Secure Ports Layer-4 Bridging and Filtering Sample Vlan for Layer-4 bridging For example, to enable Layer-4 Bridging on the blue Vlan Creating a Port-Based Vlan for Layer-4 BridgingPlacing the Ports on the Same Vlan Enabling Layer-4 Bridging on the Vlan Applying a Layer-4 Bridging ACL to a Port SmartSwitch Router User Reference Manual 289 290 Chapter QoS Configuration Guide QoS & Layer-2/Layer-3/Layer-4 Flow Overview Layer-2 and Layer-3 & Layer-4 Flow Specification Precedence for Layer-3 Flows Traffic Prioritization for Layer-2 FlowsSSR Queuing Policies 802.1p Priority Mapping Configuring Layer-2 QoSControl Creating and Applying a New Priority Map Removing or Disabling Per-Port Priority Map Traffic Prioritization for Layer-3 & Layer-4 Flows Configuring IP QoS PoliciesDisplaying Priority Map Information Configuring IPX QoS Policies Setting an IP QoS PolicySetting an IPX QoS Policy Specifying Precedence for an IP QoS Policy Allocating Bandwidth for a Weighted-Fair Queuing Policy Configuring SSR Queueing PolicySpecifying Precedence for an IPX QoS Policy Weighted Random Early Detection Wred ToS Rewrite Configuring ToS Rewrite for IP Packets Tos-rewrite Tos-precedence-rewrite = 5 tos-rewrite = Monitoring QoS Limiting Traffic Rate Rate Limiting Modes Per-Flow Rate Limiting Port Rate LimitingPolicy Apply a per-flow rate limit Aggregate Rate Limiting Define a port rate limit policy toLimit incoming traffic on a port Limit outgoing traffic on a port Example Configurations Per-Flow Rate Limiting Aggregate Rate Limiting Displaying Rate Limit Information Chapter Performance Monitoring Guide Performance Monitoring Overview Show port error statistics Show information about the masterMAC table Show information about a Particular MAC address Show info about multicasts Monitoring Broadcast Traffic Configuring the SSR for Port MirroringOnly IP ACLs can be specified for port mirroring 312 Rmon Rmon Overview Configuring and Enabling Rmon Example of Rmon Configuration Commands Rmon Groups Lite Rmon Groups Standard Rmon Groups Professional Rmon Groups Control Tables Using Rmon Configuring Rmon Groups Enabledisable Num status enabledisableString status enabledisable Size owner string status enabledisable Port port owner string status enabledisable Oid type absolutedelta status enabledisableRmon protocol-distribution index index-number Rmon user-history-control index index-number Displaying Rmon Information Rmon CLI Filters Following shows Host table output without a CLI filter 01000CCCCCCC Using Rmon CLI Filters Troubleshooting RmonCreating Rmon CLI Filters 326 Allocating Memory to Rmon Ssr# rmon show status Rmon set memory number Lfap Cabletron’s Traffic Accounting Services Configuring the Lfap Agent on the SSR Start the Lfap protocol on the SSR Allow external ACL policy control Command Displays Monitoring the Lfap Agent on the SSR WAN WAN Overview Configuring WAN Interfaces Primary and Secondary AddressesStatic, Mapped, and Dynamic Peer IP/IPX Addresses Static Addresses Following command line displays an example for a Vlan Following command line displays two examples for PPPMapped Addresses Dynamic Addresses Forcing Bridged Encapsulation Following command line displays an example for PPPPacket Compression Example Configurations Average Packet SizeNature of the Data Link Integrity WAN Quality of Service Packet Encryption Weighted-Fair Queueing Source Filtering and ACLsCongestion Management Random Early Discard RED Virtual Circuits Frame Relay OverviewAdaptive Shaping Configuring Frame Relay Interfaces for the SSR Permanent Virtual Circuits PVCs Setting up a Frame Relay Service Profile Applying a Service Profile to an Active Frame Relay WAN Port Frame Relay Port Configuration Monitoring Frame Relay WAN Ports 344 Point-to-Point Protocol PPP Overview Configuring PPP InterfacesUse of LCP Magic Numbers Setting up a PPP Service Profile Defining the Type and Location of a PPP Interface Configuring Multilink PPP Bundles Applying a Service Profile to an Active PPP PortCompression on MLP Bundles or Links PPP Port Configuration Monitoring PPP WAN Ports Ssrconfig# ppp apply service profile2 ports hs.5.1 WAN Configuration Examples Simple Configuration File Multi-Router WAN Configuration Multi-router WAN configuration Router R1 Configuration File Following configuration file applies to Router R1Router R2 Configuration File Following configuration file applies to Router R2 Router R3 Configuration File Following configuration file applies to Router R3Router R4 Configuration File Following configuration file applies to Router R4 Router R5 Configuration File Following configuration file applies to Router R5Router R6 Configuration File Following configuration file applies to Router R6 SmartSwitch Router User Reference Manual 355 356 Appendix a New Features Supported on Line Cards IntroductionSSR 8000/8600 Line Cards Line Cards Available Prior to the 3.0 Firmware Release Pre-3.0 SSR Firmware Line Card Part Number Features WFQ Line Card Part Firmware Number Features Listed 3.0 FeaturesLine Cards Introduced at the 3.1 Firmware Release T-Series Pre-3.0 Routing Table on Pre-3.0 Line card POS OC-12cSMF SSR-ATM29-02 ATM OC-3c SSR-ATM31-02 ATM OC-12c SSR 2000 Line Cards SSR-2-LX70AAs -- Chassis AAs Line Cards Network Address Translation New Features that Require Specific Line CardsSSR-2-LX70-AA Page Load Balancing Lsnat Layer 4 Bridging Per-Protocol Vlan QoS Rate Limiting Port Rate Limiting Established Bit ACL ToS RewriteMultiple IPX Encapsulation Weighted Random Early Detection Wred Port Interface Ingress Port Egress Port Features BaseSummary Jumbo Frames Multiple IPX Encapsulation Interface AA/T-series Identifying a Line CardExample Non -AA Line Card 372