Cabletron Systems 9032578-05 manual Displaying ATM Port Information

Displaying ATM Port Information

Displaying ATM Port Information

There are a variety of ATM statistics that can be accessed through the command line interface. The atm show commands can only be used in Enable mode.

To display information about the VPL configurations on an ATM port:

Displays the VPL configurations on an ATM port.

atm show vpl port <port list> all-ports

The following is an example of the information that is displayed with the command listed above:

ssr(atm-show)# vpl port at.9.1

VPL Table Contents for Slot 9, Port 1:

Virtual Path Identifier: 1

Administrative Status:	Up
Operational Status:	Up
Last State Change:	1581
Service Definition:	ubr-default
Service Class:	UBR
Peak Bit Rate:	Best Effort
Sustained Bit Rate: 0 Kbits/sec (0 cps)
Maximum Burst Size: 0 cells
Encapsulation Type: Routed LLC
F5-OAM:	Requests & Responses

The following is a description of the display fields:

•	Virtual Path Identifier	Identifies a particular VP.
•	Administrative Status	Shows whether the VP is a viable network
		element.
		Up indicates a viable network element.
		Down indicates a non-viable network element.
•	Operational Status	Shows whether the VP is passing traffic.
		Up indicates traffic.
		Down indicates no traffic.
•	Last State Change	Shows the last time the VP went up or down.
		Time is in seconds relative to system bootup.
•	Service Definition	Shows the name of the defined service and its
		traffic parameters

48 SmartSwitch Router User Reference Manual