Cabletron Systems 9032578-05 manual Configuring a Static IP Address

	Chapter 7: DHCP Configuration Guide
Table 5. Client Parameters
Parameter	Value
netbios-name-server	IP address of NetBIOS Name Server (WINS server)
netbios-node-type	NetBIOS node type of the client
netbios-scope	NetBIOS scope of the client

To define the parameters that the DHCP server gives the clients, enter the following command in Configure mode:

Define client parameters.

dhcp <scope> define parameters <parameter>

<value>...

Configuring a Static IP Address

To define a static IP address that the DHCP server can assign to a client with a specific MAC address, enter the following command in Configure mode:

Define static IP address for a particular MAC address.

dhcp <scope> define static-ip <ipaddr> mac-address <macaddr> [<parameter> <value>...]

Grouping Scopes with a Common Interface

You can apply several scopes to the same physical interface. For example, scopes can define address pools on different subnets that all are accessed through the same SSR port. In this case, scopes that use the same interface must be grouped together into a “superscope.”

To attach a scope to a superscope, enter the following command in Configure mode:

Attach a scope to a superscope.

dhcp <scope> attach superscope <name>

SmartSwitch Router User Reference Manual 69